Product ID:R74-2001, TONER CARTRIDGE FOR LASER BEAM (SUPDAT)
MSDS Date:01/25/1993
FSC:6850
NIIN:00N053324
MSDS Number: BVPSH

CANON INC

30-2, SHIMOMARUKO 3-CHROME, OHTA-KU
TOKYO
JA

Emergency Phone: 03-3758-2111

Info Phone: 03-3758-2111

Cage: EO274

CANON INC

TOKYO JA

Telephone: 03-3758-2111/ 516-328-5600(USA)

Cage: EO274

STYRENE ACRYL COPOLYMER; (STYRENE ACRYLATE COPOLYMER)

Fraction By Weight: 45-55%

OSHA PEL N/K

ACGIH TLV: N/K

IRON OXIDE (MFR CAS # 317-61-9)

CAS: 1332-37-2

RTECS: NO7380000

Fraction By Weight: 30-40%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3 FUME (FE)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MINIMAL RESPIRATORY TRACT IRRITATION
MAY OCCUR AS WITH EXPOSURE TO LARGE AMOUNTS OF ANY DUST.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHALATION: REMOVE FROM EXPOSURE. EYE: FLUSH WITH PLENTY OF
WATER FOR AT LEAST 15 MINUTES. IF IRRITATION PERSISTS CONTACT
PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. INGESTION: CALL MD
IMMEDIATELY (FP N).

Extinguishing Media:CARBON DIOXIDE, WATER, DRY CHEMICALS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:THIS MATERIAL, LIKE MOST ORGANIC MATERIAL
IN POWDER FORM, IS CAPABLE OF CREATING DUST EXPLOSION.

Spill Release Procedures:SWEEP MATERIAL ONTO PAPER OR COLLECT IT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
FROM CONTACT WITH OXIDIZING MATERIALS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGG .
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
TRADE NAME/PART NUMBER: PRINTER P90 FOR HP.

Melt/Freeze Pt:M.P/F.P Text:212F,100C
Vapor Pres:NEGLIGIBLE
Spec Gravity:1.5-1.8(H*2O=1)
Evaporation Rate & Reference:NEGLIG (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TONER IS FINE POWDER, WITH SLIGHT PLASTIC ODOR.
Percent Volatiles by Volume:NEGLIG

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Hazardous Decomposition Products:AS WITH ANY OTHER ORGANIC MATERIAL,
COMBUSTION WILL PRODUCE CARBON.

Waste Disposal Methods:NO SPECIAL DISPOSAL TECHNIQUE IS REQUIRED.
ENSURE COMPLIANCE WITH FEDERAL, STATE AND/OR LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.